On an action-packed Wednesday March 13, Marcus Kremers came to the Dutch pavilion from Holland High Tech where Inholland Composites...
News & Events
Rogier Nijssen and Moaaz Gendy co-present Dutch Composites ecosystem at JEC2019
On Wednesdaymorning March 13, Jason Palmer, journalist with The Economist, presented the Dutchcomposites ecosystem during the ‘Country on Stage’ event....
National Coorporation Agenda On Composites Is Available!
JEC, News, nieuws, 13 March 2019 Source: https://compositesnl.nl/en/national-coorporation-agenda-on-composites-is-available/ At the JEC World 2019, the sector presented the National Composites Collaboration Agenda, in...
First-Time-Right results presented at JEC2019 in Paris
DISCOVER THE NEAR FUTURE OF THE VACUUM INFUSION PROCESS From March 12 to 14 Inholland Composites and NHL-Stenden are presenting...
DutchVR and Vixed will showcase VR applications at the JECWorld 2019 in Paris
The First-Time-Right consortium includes partnership with DutchVR and Vixed, which are both active in the hightech domain and composites related...
Inholland Composites presenting First-Time-Right project at JEC with Dutch composites’ ecosystem
Country On Stage Program The Netherlands JEC, nieuws, 5 maart 2019: sourcehttps://compositesnl.nl/country-on-stage-program-the-netherlands/ The Netherlands is leading the way in innovation throughout...
Smart Silicon Vacuum Bag arrives at Inholland Composites and is ready for implementation
The Smart Silicon Vacuum Bag has arrived from CT Platon making the SmartMould almost ready for the JEC in Paris....
Hydra1 business case presented at Inholland Composites
For their study Technical Business Economics a student group from Inholland Alkmaar did research into the businesss case for Hydra1....
SmartMould Control system ready for implementation
Over the last couple of weeks the build of the demonstrator is progressing rapidly. The Hydra1 SmartMould will be demonstrating...
First-Time-Right project finish JEC2019
Beste consortium deelnemer van het First-Time-Right project. Bekijk de volgende video uitnodiging voor de afsluiting van het project op 13...
Contactless Dielectric Analyzer & Mould Heating at JECworld 2019
Written by Cor Boksem | December 30, 2018 New Contactless Dielectric Analyzer and Mould Heating at JECworld in Paris We will introduce our...
Elektrisch varen in Friesland in de lift
Aankomende winter steekt het bouwteam van Hoora Watersport in Heeg flink de handen uit de mouwen. In opdracht van HappyWhale...
Country on stage – JEC2019
Nederland ‘Country On Stage’ Op JEC World 2019 JEC, nieuws, 27 november 2018 Delft, 27 november 2018 – Tijdens JEC World...
Inholland Composites presenting at ISCM symposium at the NLR
Inholland Composites will present some of its current research findings on behalf of the First-Time-Right consortium during the 8th International Symposium on...
Samenwerking CompositesNL En Netherlands Maritime Technology
nieuws, 29 oktober 2018 CompositesNL en Netherlands Maritime Technology (NMT) bundelen haar krachten om de toepassing van composieten in de...
Visiting Hannover Messe 2018
With over 210.000 visitors, the Hannover Messe is one of the leading trading fairs in the area of industrialization. Cor...
Praktijkdag NHL Stenden
Op donderdag 12 juli zijn een aantal consortiumleden bijeengekomen op NHL Stenden in Leeuwarden om te sparren over de resultaten...
Adel Polyester 20 Jaar
bron: https://compositesnl.nl/feest-adel-polyester-20-jaar/ Een mooi jubileum van 20 jaar wilde Adel niet ongemerkt voorbij laten gaan. De productiehal was omgetoverd tot een...
Impressie ALV CompositesNL
Afgelopen vrijdag 1 juni vond de Algemene Leden Vergadering van CompositesNL plaats in Delft. We zijn gastvrij ontvangen door Inholland...
1 Juni: Algemene Ledenvergadering CompositesNL
WELKOM OP ONZE ALGEMENE LEDENVERGADERING Graag nodigen wij u uit voor onze Algemene Ledenvergadering die plaats zal vinden op 1...
Prototype presentation and company visit Nedcam
On Tuesday the 8th of may 2018 Jan Volker (Director of Nedcam) and Denzel Vonk (Intern of Inholland Composites) organized...
Zaadnoordijk vergroot haar productiecapaciteit opnieuw
Fase II. Eerste paal geslagen voor tweede uitbreiding van Zaadnoordijk Yachtbuilders Heerenveen – In maart 2018 is de eerste...
Company visit: Adel Polyester
On the 22nd of March in the context of the context of the First-Time-Right consortium, Inholland Composites visited Adel polyester...
Inholland Composites joins Holland Pavilion during the JEC World2018
On 6-8 March, a team from Inholland Composites visited JEC 2018. Just north of Paris, France, this year’s largest European composites...
Defect detection automation with Fanuc Robot finally achieved
The final stage of Ruben’s graduation research project is finally achieved. The defect detection of defects in the plies is...
Schatmaker Add-Maps 2.0 klaar voor gebruik
Eerste project met Add-Maps 2.0 !!! Schatmaker biedt u een methode om snel en efficiënt een overzicht te maken van...
Company visit: Theuws polyester
On the 21st of Februari, Inholland Composites visited Theuws Polyester located in Wieringerwerf. The reason for this visit was to...
Inholland Composites joins CompositesNL Holland Pavillon at JEC World 2018
Please come and find us at the JEC World in Paris to discuss research opportunities for Composites Automation, Repair and...
Status meeting on model-based process monitoring with Twenco and Polyworx
On February 22 a worksession was organized at Twenco in Vriezenveen to discuss the status of WP2 and WP3 with...
Succesvolle dag van de thema’s bij CompositesNL
nieuws, 14 februari 2018 bron: compositesnl.nl/category/nieuws Afgelopen vrijdag 9 februari kwam er een enthousiaste groep mensen bijeen voor de dag van...
Dag van de thema’s – februari 9 @ 09:30 – 16:00
Op 9 februari aanstaande wordt door CompositesNL de dag van de thema’s georganiseerd. Deze dag is bedoeld voor de leden...
Students present their intern- and graduation work
Every year there are two groups of students doing their internship or graduation at Inholland Composites. Last 6 months there...
Inholland Composites delivers repair instructables for RAAK MKB
On January 24 the results of a project for an automotive research consortium were presented in Arnhem. In 2015 Inholland Composites...
How to obtain permeability values for vacuum infusion
To achieve the first time right dream, smarter and better solutions are always being researched to improve many of the methods...
3D printed moulds: a viable option?
Assume there is a problem which every body is talking about. Let’s say you have a concept idea on how...
Learning from innovative solutions from Hoora Watersport
Vandaag First Time Right innovaties besproken met Hoora Watersport in Heeg. Indrukwekkend bedrijf met enorm veel kennis over composiet, polyester...
NCC UK: how digital is changing the shape of composites
Simon Astwood, engineering capability manager at the National Composites Centre in the UK (NCC), provided an inspirational presentation during the...
Teachers Electrical and Mechanical Engineering on internship at composites industry
by NHN Lecturers Electrical- and Mechanical Engineering of the ROC Horizon College and Inholland Applied University of Science were introduced to part...
3rd consortium meeting at NHL in Leeuwarden
On November 8 the 3rd plenary meeting took place at the NHL in Leeuwarden. The NHL (Noordelijke Hogeschool Leeuwarden) and...
Mobile Robot-arm demonstrator premieres at CompositesNL event
On October 18, 2017 Inholland Composites participated in an event organised by CompositesNL, the Dutch Composites Association. The members of CompositesNL...
Metstrade show 2017
METSTRADE Show the world’s biggest and most visited B2B leisure marine equipment show, which has been bringing the marine industry...
Networking meeting on October 18th, 2017
Composites NL, the Dutch Composites Association, will host a new format networking meeting on October 18th, 2017 in the Digital...
2nd consortium meeting at Pontis Engineering
On June 29, the First Time Right consortium visited Pontis Engineering in Rouveen for the 2nd plenary meeting. Pontis Engineering...
New intern/graduation assignments available
Inholland Composites is constantly looking for talent to work on internship/graduation assignments, temporary projects and other activities. These can be hosted...
Kick-off meeting First Time Right
On April 12 a successful kick-off meeting took place for the new First Time Right consortium focusing on the recently...
Inholland Composites visits JEC World 2017 in Paris
As in previous years, Inholland Composites attended this years edition of the JEC World in Paris. This international composites annual event...
Inholland Composites and NHL collaborate in new Raak-MKB project
At the end of February Inholland Composites and Noordelijke Hogeschool Leeuwarden (NHL) were awarded with funding for their new Raak-MKB project: “First-time-right injections for the production...