Category: News

Hydra1 business case presented at Inholland Composites
Post

Hydra1 business case presented at Inholland Composites

For their study Technical Business Economics a student group from Inholland Alkmaar did research into the businesss case for Hydra1. This involves a hydrofoil electric surfboard which is a result of the First-Time-Right Applied Research Program. During this business case study they calculated break-even sales for Hydra1, cost savings by Virtual Learning and cost savings...

SmartMould Control system ready for implementation
Post

SmartMould Control system ready for implementation

Over the last couple of weeks the build of the demonstrator is progressing rapidly. The Hydra1 SmartMould will be demonstrating the innovative research results of the First-Time-Right Applied Research program. The SmartMould contains features such as: Infusion front flow control controlled by machine vision Leakage detection located by contactless sensors from Twenco Curing state monitoring...

First Hydra1 boards are finishing production
Post

First Hydra1 boards are finishing production

The Hydra1 electric surfboard is currently being produced at Inholland Composites. The SmartMould that is used for this production is based on the results of the First-Time-Right RAAK-MKB research project. The boards that are either made of E-glass fibres, Bio fibres, Carbon fibres or a combination. The board is build up from two shells glued...

First-Time-Right project finish JEC2019
Post

First-Time-Right project finish JEC2019

Beste consortium deelnemer van het First-Time-Right project. Bekijk de volgende video uitnodiging voor de afsluiting van het project op 13 maart om 13:15 tijdens de JEC 2019 in Parijs. 2 jaar geleden zijn we vanuit 2 hogescholen, 15 bedrijven en 3 kennis instellingen een praktijkgericht onderzoek gestart onder de naam First-Time-Right. Dit project valt binnen onze...

Contactless Dielectric Analyzer & Mould Heating at JECworld 2019
Post

Contactless Dielectric Analyzer & Mould Heating at JECworld 2019

Written by Cor Boksem | December 30, 2018 New Contactless Dielectric Analyzer and Mould Heating at JECworld in Paris We will introduce our latest Dielectric Analyzers (DEA) for contactless curing and process monitoring. And our new Industrial Mould Heating modules. One module where on you can connect all necessary power, safety and temperature measurement cables. Wide range Voltage...

Elektrisch varen in Friesland in de lift
Post

Elektrisch varen in Friesland in de lift

Aankomende winter steekt het bouwteam van Hoora Watersport in Heeg flink de handen uit de mouwen. In opdracht van HappyWhale Friesland gaan de jachtbouwers een recordaantal elektrische sloepen bouwen. Maar liefst 43 sloepen worden volgend voorjaar vanuit het Friese Heeg opgeleverd. HappyWhale is verhuurder van elektrische sloepen. In Friesland, maar ook in Zuid-Holland, kunnen watersportliefhebbers...

Country on stage – JEC2019
Post

Country on stage – JEC2019

Nederland ‘Country On Stage’ Op JEC World 2019 JEC, nieuws, 27 november 2018 Delft, 27 november 2018 – Tijdens JEC World 2019,  de grootste composietbeurs ter wereld van 12-14 maart in Parijs, is Nederland ‘Country on Stage’. Een unieke gelegenheid voor Nederland om onze specifieke kwaliteiten, kennis en vaardigheden op het gebied van composieten in de schijnwerpers...

Inholland Composites presenting at ISCM symposium at the NLR
Post

Inholland Composites presenting at ISCM symposium at the NLR

Inholland Composites will present some of its current research findings on behalf of the First-Time-Right consortium during the 8th International Symposium on Composites Manufacturing for High Performance Applications on 21 – 22 November 2018, Marknesse, The Netherlands.First-Time-Rightis an applied research project (powered by a SiA Raak MKB funding program) and includes automation solutions for the vacuum infusion process...

Samenwerking CompositesNL En Netherlands Maritime Technology
Post

Samenwerking CompositesNL En Netherlands Maritime Technology

nieuws, 29 oktober 2018 CompositesNL en Netherlands Maritime Technology (NMT) bundelen haar krachten om de toepassing van composieten in de scheepsbouw breder mogelijk te maken. Toepassing van composieten in de scheepsbouw is niet nieuw, maar voor de commerciële scheepvaart is het nog geen vanzelfsprekendheid. De belangrijkste reden hiervoor is dat de maritieme regelgeving gebaseerd is...