Consider this
Manufacturing of composites faster and more reliably by allowing digital technologies in the vacuum infusion process. This can be achieved by applying First-Time-Right principles currently under investigation by this consortium

Our idea
We will focus on 3 innovative ideas that significantly impact the vacuum infusion process.
- A smart mould manufactured with low-cost methods capable of monitoring and controlling the resin flow
- Simulation assisted infusion that predicts the future allowing for faster settling times
- Interactive visualisation of the production process using Virtual- and Augmented reality technologies

First-Time-Right consortium bringing automated solutions for vacuum infusion to JECWorld 2019
Inholland and NHL-Stenden presented their applied research results at the biggest composites exhibition worldwide on behalf of 15 SME’s and...
Maarten Camps, secretary-general of Economic Affairs and Marc Hendrikse, Chairman HTSM visit Inholland Composites at JEC2019
This year The Netherlands was more visible at JEC World as the Dutch Composites Agenda was presented during a 1,5...
Vixed showing MVP at JEC2019
During the JEC 2019 between 12 and 14 March, various SME’s from the Netherlands showcased their developments at the Holland...
First-Time-Right results handed over to CompositesNL chairman
On an action-packed Wednesday March 13, Marcus Kremers came to the Dutch pavilion from Holland High Tech where Inholland Composites...
Rogier Nijssen and Moaaz Gendy co-present Dutch Composites ecosystem at JEC2019
On Wednesdaymorning March 13, Jason Palmer, journalist with The Economist, presented the Dutchcomposites ecosystem during the ‘Country on Stage’ event....
National Coorporation Agenda On Composites Is Available!
JEC, News, nieuws, 13 March 2019 Source: https://compositesnl.nl/en/national-coorporation-agenda-on-composites-is-available/ At the JEC World 2019, the sector presented the National Composites Collaboration Agenda, in...
Digital Twin of Dutch composites professor visits JEC2019
Virtual reality? Inholland Composites is way a’head’! Inholland Composites co-founder Rogier Nijssen, professor of applied sciences, arrived at JEC 2019...
First-Time-Right results presented at JEC2019 in Paris
DISCOVER THE NEAR FUTURE OF THE VACUUM INFUSION PROCESS From March 12 to 14 Inholland Composites and NHL-Stenden are presenting...
Hydra1 makes it to JEC2019 Just-In-Time thanks to Carbonherstel
Inholland Composites almost did not make the Hydra1 delivery on time for the JEC2019, but thanks to Carbonherstel we were...
DutchVR and Vixed will showcase VR applications at the JECWorld 2019 in Paris
The First-Time-Right consortium includes partnership with DutchVR and Vixed, which are both active in the hightech domain and composites related...
Inholland Composites presenting First-Time-Right project at JEC with Dutch composites’ ecosystem
Country On Stage Program The Netherlands JEC, nieuws, 5 maart 2019: sourcehttps://compositesnl.nl/country-on-stage-program-the-netherlands/ The Netherlands is leading the way in innovation throughout...
Smart Silicon Vacuum Bag arrives at Inholland Composites and is ready for implementation
The Smart Silicon Vacuum Bag has arrived from CT Platon making the SmartMould almost ready for the JEC in Paris....
Hydra1 business case presented at Inholland Composites
For their study Technical Business Economics a student group from Inholland Alkmaar did research into the businesss case for Hydra1....
SmartMould Control system ready for implementation
Over the last couple of weeks the build of the demonstrator is progressing rapidly. The Hydra1 SmartMould will be demonstrating...
First Hydra1 boards are finishing production
The Hydra1 electric surfboard is currently being produced at Inholland Composites. The SmartMould that is used for this production is...
First-Time-Right project finish JEC2019
Beste consortium deelnemer van het First-Time-Right project. Bekijk de volgende video uitnodiging voor de afsluiting van het project op 13...
Contactless Dielectric Analyzer & Mould Heating at JECworld 2019
Written by Cor Boksem | December 30, 2018 New Contactless Dielectric Analyzer and Mould Heating at JECworld in Paris We will introduce our...
Elektrisch varen in Friesland in de lift
Aankomende winter steekt het bouwteam van Hoora Watersport in Heeg flink de handen uit de mouwen. In opdracht van HappyWhale...
Country on stage – JEC2019
Nederland ‘Country On Stage’ Op JEC World 2019 JEC, nieuws, 27 november 2018 Delft, 27 november 2018 – Tijdens JEC World...
Inholland Composites presenting at ISCM symposium at the NLR
Inholland Composites will present some of its current research findings on behalf of the First-Time-Right consortium during the 8th International Symposium on...
Samenwerking CompositesNL En Netherlands Maritime Technology
nieuws, 29 oktober 2018 CompositesNL en Netherlands Maritime Technology (NMT) bundelen haar krachten om de toepassing van composieten in de...
Visiting Hannover Messe 2018
With over 210.000 visitors, the Hannover Messe is one of the leading trading fairs in the area of industrialization. Cor...
Praktijkdag NHL Stenden
Op donderdag 12 juli zijn een aantal consortiumleden bijeengekomen op NHL Stenden in Leeuwarden om te sparren over de resultaten...
Adel Polyester 20 Jaar
bron: https://compositesnl.nl/feest-adel-polyester-20-jaar/ Een mooi jubileum van 20 jaar wilde Adel niet ongemerkt voorbij laten gaan. De productiehal was omgetoverd tot een...
Impressie ALV CompositesNL
Afgelopen vrijdag 1 juni vond de Algemene Leden Vergadering van CompositesNL plaats in Delft. We zijn gastvrij ontvangen door Inholland...
1 Juni: Algemene Ledenvergadering CompositesNL
WELKOM OP ONZE ALGEMENE LEDENVERGADERING Graag nodigen wij u uit voor onze Algemene Ledenvergadering die plaats zal vinden op 1...
Prototype presentation and company visit Nedcam
On Tuesday the 8th of may 2018 Jan Volker (Director of Nedcam) and Denzel Vonk (Intern of Inholland Composites) organized...
Zaadnoordijk vergroot haar productiecapaciteit opnieuw
Fase II. Eerste paal geslagen voor tweede uitbreiding van Zaadnoordijk Yachtbuilders Heerenveen – In maart 2018 is de eerste...
Company visit: Adel Polyester
On the 22nd of March in the context of the context of the First-Time-Right consortium, Inholland Composites visited Adel polyester...
Inholland Composites joins Holland Pavilion during the JEC World2018
On 6-8 March, a team from Inholland Composites visited JEC 2018. Just north of Paris, France, this year’s largest European composites...